Polaris Key Blank Chart (2024)

FAQs

Can you make a copy of a Polaris key? ›

Polaris offers GENERAL key blanks that can be cut to match an existing key. If both keys have been lost, you will need to replace the ignition. Contact your Polaris Dealer for key and ignition replacement assistance.

Model 2011 and newer RANGER EV models use keys with a right-hand groove or left-hand groove. Groove is determined when holding the key, ready to put into the ignition. If your key has a groove on the right-hand side, use key blank 0453143. If your key has a groove on the left-hand side, use key blank 0453372.

For 4000 series blanks, reference all 4 digits stamped on the blank. The Polaris Key Cover for these keys is part number 5433534. For RZR 200 models, see your Polaris Dealer for more information and to order a replacement key. The key blank is part number 4080125.

If there's no rush, you could always contact the ATV dealership, where they will likely be able to send a new set of keys to your home after sharing the VIN or model number. If all else fails, you can also remove your ignition and take It to a locksmith, which will prevent the hassle of towing the ATV.

The short answer to that question is yes, Home Depot can duplicate keys as long as you have the original with you.

Local Locksmith can copy keys for most makes and models of 4 wheelers on the trail today.

Your RANGER's VIN can be found stamped on the frame, shown above. Its exact location varies based on model. Most RANGER vehicles from model year 2015 until present feature a VIN stamp in the left rear wheel well.

The Polaris Speed Key Accessory for M1400 provides a way for the owner to choose between two predefined speed limits for their Side by Side vehicle. In the left key position (Turtle Icon) the vehicle has a speed limit of 10 mph (16 kph) or 15 mph (24 kph) (depending on which speed is selected).

No, Yamaha ATV wheels won't work for Polaris, and a few reasons are responsible for this incompatibility. One is that the Yamaha wheels have different lug patterns. Another reason is that the backspacing for each brand is different from other brands. Hence, Yamaha ATV wheels don't fit Polaris.

If you are signed up for PolarisMobile, dial *833# and start transacting. However, if you are not signed up on PolarisMobile, please follow the steps below: Dial *833# from your Polaris Bank registered line.

What is a 7 digit serial number on a Polaris? ›

The Vehicle Identification Number (VIN) of your Polaris is a unique number used to identify your vehicle. For units that are older than 1999 the VIN's are 7 digits long. The 2nd and 3rd digits indicate the year. VIN located in the front left wheel well or the back left lower frame rail.

Record your VIN and engine serial number in your Owner's Manual for easy reference. Use the VIN search tool to enter your VIN and find your vehicle's year, model, warranty status, safety bulletins, engine serial number and more. For more on the VIN Search Tool, read Off-Road Vehicle VIN Search Tool.

If you don't have an extra key, you'll likely need to get a replacement at a dealership and provide proof of ownership, according to Carfax. The dealership will then program a new key to work with your car. This may take a few days, during which they will need to hold onto the car.

If you lose your key, you may need to call a locksmith or even replace the entire ignition system of your motorcycle, which can be costly. By having a duplicate key, you can avoid these problems and ensure that you always have access to your motorcycle.

Locate Your VIN, usually found on the steering neck under the instrument panel. Once you have found it, take it and some proof of ownership of the bike to your dealership. The dealership will check your proof of possession and, once confirmed, either give you a new key or an entirely new ignition cylinder with a key.

There are many ways to duplicate a key fob, but the most common method is with a key fob copier. RFID copiers are affordable and easy to buy online, with most models ranging from $10 to $20. Here's how to use an RFID copier: Turn on the device and hold your key fob to a compatible RFID copier.

Basic keys can be copied at any dealership, locksmith or hardware store. Laser-cut, or sidewinder keys, are harder to copy and are more expensive than a basic key.

The average cost to copy a basic key is $2 to $5. A car key copy costs $5 to $15 for a plain key only or $150 to $500 for a fob key replacement.

Yes, a locksmith can make a key without the original. The key – small yet mighty – stands as a sentinel to our most prized possessions and private spaces.